Descrizione annuncio

Vendo testata Tone Hammer 700 per cambio strumentazione. Condizioni estetico funzionali pari al nuovo.

Specifiche prese dal sito Aguilar:

Input Voltage: 100 - 240~VAC 50/60Hz Mains Fuse: Internal T 6.3A H/250V Maximum power consumption: 835W
The Tone Hammer 700 features a universal AC mains input, allowing it to operate on any standard AC mains voltage ranging from 100 to 240 Volts with frequency of either 50 or 60 Hz.
Connect your speaker cabinet(s) to the amplifier’s speaker output using only cable(s) with Speakon-to-Speakon connections, or Speakon to 14” connections with an insulated barrel. Tone Hammer 700 amplifier uses a bridge-tied load topology. This means that both speaker output terminals are connected to hazardous voltage. Thus, using a 14” plug with non- isolated barrel could present a risk of an electric shock.
Speaker output is wired to pins 1+ and 1- on provided 4 pole Speakon connector on the back panel of Tone Hammer 700. This connector will mate with any standard 2 pole or 4 pole Speakon plugs and will work with any standard 2 or 4 wire Speakon-to-Speakon speaker cable. Use 12- gauge or larger speaker cable to prevent temperature rise in the cable. Increased temperature could compromise the electrical insulation in the cable and increase the risk of fire and electric shock.
The amount of power this amplifier will produce varies with the impedance rating of your cabinets.
8 (one 8 cabinet) – 350 W
4 (one 4 or two 8 cabinets) – 700 W
2.67 (one 8 and one 4 or three 8 cabinet) – 700 W

Spedizione con scatola originale inclusa nel prezzo. Disponibile a prove.
Per info Carlo******

NON RISPONDO A PROPOSTE DI PERMUTA